by Nice Rapid | Apr 9, 2024
How to Prevent Injection Molding Flash? Flash is a common defect in injection molding, describing the thin layer protruding from the mold parting line or areas around the mold where two contradictory surfaces meet, forming a physical boundary. Such areas create...
by Nice Rapid | Jul 21, 2023
Insert Molding Vs Overmolding Overmolding describes a form of injection molding creating components from two or more different materials. Some manufacturers refer to the process as in-mold assembly. Two distinct elements or processes are involved with overmolding...
by Nice Rapid | Jul 5, 2021
5 Most Common Resins Used in Plastic Injection Molding One of the reasons Plastic Injection Molding is so prevalent among the manufacturing processes is due to it offers a wide range of materials selection. This allows product designers and engineers able to create...
by Nice Rapid | May 31, 2021
Plastic Injection Molding Surface Finishes Plastic injection molded parts can be surface finished from matte to highly polished. The higher requirement on the surface finish of the part, the longer effort and time spent during the production of the mold, hence it...
by Nice Rapid | May 8, 2021
What is Plastic Injection Molding? The Basics of Plastic Injection Molding Plastic Injection Molding is a manufacturing method to obtain plastic molded product by injecting molten plastic resin into a mold, the resin then cools below its melting temperature and...
